Detailansicht

Wissensnetz

Person

Jeanette Hussong (1979-)

Maschinenbauingenieurin

Name	Jeanette Hussong
Zeit	1979- (Lebensdaten)
Ort	Sonstiges Ausland / Unbekanntes Land
Akademischer Grad bzw. Titel	Jun.-Prof. Dr.- Ing.
Beruf	Maschinenbauingenieurin (charakteristischer Beruf)
Beziehung	Technische Universität Darmstadt. Fachgebiet Strömungslehre und Aerodynamik
Quelle	Niederländ. NB
Datensatztyp	Person
GND-Nummer	1021390658
Datensatz-ID	1021390658
Beteiligt an alle anzeigen Drop impact onto a thin film of another liquid From Single Drop to Spray Cooling: Influence of Lubricant Addition on Heat Transfer Molecular transport and water condensation inside mesopores with wettability step gradients On the calibration of Astigmatism particle tracking velocimetry for suspensions of different volume fractions Optical investigation on the interaction between a fuel-spray and an oil wetted wall with the focus on secondary droplets PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions Scale-resolving modeling of heat and mass transfer in IC engine-relevant impinging flow configurations: Sensitized RANS-RSM-based turbulence anisotropy characterization Transitional Boiling Phenomena in Single Drop Impact and Spray Cooling Viscosity Modeling for Blood and Blood Analog Fluids in Narrow Gap and High Reynolds Numbers Flows Studying macro- and mesoscopic wetting dynamics of a spreading oil droplet using multiple wavelength interferometry LIF-based quantification of the species transport during droplet impact onto thin liquid films : Species transport during droplet impact onto thin liquid films Charakterisierung von Flüssigkeitsfilmen mittels Laserabsorptionsspektroskopie in der Abgasnachbehandlung Computational study of thermotechnical two-phase flow configurations with scale-resolving turbulence models Effect of Particle Migration on the Stress Field in Microfluidic Flows of Blood Analog Fluids at High Reynolds Numbers Experimental investigation of fluid dynamics and heat transport during single and multiple drop impingement onto a superheated wall Fundamental study on 3D particle tracking, flow stability and particle dynamics relevant to Taylor-Couette reactors Ice Particle Impact Onto Dry, Wet and Granular Substrates Multidimensional sorting of microparticles in electrically switchable dielectrophoretic filters Spray impact onto a hot solid substrate: Film boiling suppression by lubricant addition Transport Processes in Snow and Ice Crystal Icing Geometric descriptors for the prediction of snowflake drag Utilizing APTV to investigate the dynamics of polydisperse suspension flows beyond the dilute regime : Applying APTV to polydisperse suspensions flows An imaging technique for determining the volume fraction of two-component droplets of immiscible fluids Accelerated Particle Separation in a DLD Device at Re > 1 Investigated by Means of µPIV Computational characterization of flow and turbulence in IC engine-relevant cooling channels: An LES- and Reynolds-stress-modeling study Droplet Production and Handling in Microchannels Using Electric Fields Durability of Superamphiphobic Polyester Fabrics in Simulated Aerodynamic Icing Conditions Experimental Investigation of AdBlue Film Formation in a Generic SCR Test Bench and Numerical Analysis Using LES Hydrodynamics of Supercooled Drops Encountering Solidification at Various Moments of Impact On the multi-dimensional microparticle fractionation in a sharp-corner serpentine microchannel On the Numerics of Electrical Phenomena in Thermo-Elasto-Hydrodynamic Rolling Contacts Measurements and modelling of the residual mass upon impact of supercooled liquid drops On the micro-PIV accuracy and reliability utilizing non-Gaussian particle images PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions On the calibration of Astigmatism particle tracking velocimetry for suspensions of different volume fractions Hydrodynamic Investigations of Rapidly Stretched Liquid Bridges Ice Adhesion Strength and Durability of Nanostructured Coatings for Aerospace Applications Numerische Modellierung der Aerodynamik der PKW-LKW Überholvorgänge mittels wirbelauflösender Turbulenzmodelle Insights into leading edge vortex formation and detachment on a pitching and plunging flat plate On the 3D distribution and size fractionation of microparticles in a serpentine microchannel Utilizing the ball lens effect for astigmatism particle tracking velocimetry Implementation of a method for the inverse calculation of the heat flux during the impact of a drop chain onto a heated surface On the 3D distribution and size fractionation of microparticles in a serpentine microchannel Utilizing the ball lens effect for astigmatism particle tracking velocimetry Dilute suspensions in annular shear flow under gravity: simulation and experiment Experimental investigation of cavitation induced air release Combined Differential Interferometry and Long-range μPIV measurements of a temperature driven boundary layer flow Analysis of the cavitating flow induced by an ultrasonic horn – Experimental investigation on the influence of actuation phase, amplitude and geometrical boundary conditions Analysis of the cavitating flow induced by an ultrasonic horn : Numerical 3D simulation for the analysis of vapour structures and the assessment of erosion-sensitive areas

Hinweis

Die Betaversion beinhaltet noch nicht alle Funktionen und Informationen des Katalogs des DNB-Portals. Falls Sie Informationen vermissen oder ein Medium bestellen wollen, besuchen Sie bitte die entsprechende Seite im Katalog des DNB-Portals über folgenden Link:

Katalog der Deutschen Nationalbibliothek

Jeanette Hussong (1979-)

Drop impact onto a thin film of another liquid

From Single Drop to Spray Cooling: Influence of Lubricant Addition on Heat Transfer

Molecular transport and water condensation inside mesopores with wettability step gradients

On the calibration of Astigmatism particle tracking velocimetry for suspensions of different volume fractions

Optical investigation on the interaction between a fuel-spray and an oil wetted wall with the focus on secondary droplets

PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions

Scale-resolving modeling of heat and mass transfer in IC engine-relevant impinging flow configurations: Sensitized RANS-RSM-based turbulence anisotropy characterization

Transitional Boiling Phenomena in Single Drop Impact and Spray Cooling

Viscosity Modeling for Blood and Blood Analog Fluids in Narrow Gap and High Reynolds Numbers Flows

Studying macro- and mesoscopic wetting dynamics of a spreading oil droplet using multiple wavelength interferometry

LIF-based quantification of the species transport during droplet impact onto thin liquid films : Species transport during droplet impact onto thin liquid films

Charakterisierung von Flüssigkeitsfilmen mittels Laserabsorptionsspektroskopie in der Abgasnachbehandlung

Computational study of thermotechnical two-phase flow configurations with scale-resolving turbulence models

Effect of Particle Migration on the Stress Field in Microfluidic Flows of Blood Analog Fluids at High Reynolds Numbers

Experimental investigation of fluid dynamics and heat transport during single and multiple drop impingement onto a superheated wall

Fundamental study on 3D particle tracking, flow stability and particle dynamics relevant to Taylor-Couette reactors

Ice Particle Impact Onto Dry, Wet and Granular Substrates

Multidimensional sorting of microparticles in electrically switchable dielectrophoretic filters

Spray impact onto a hot solid substrate: Film boiling suppression by lubricant addition

Transport Processes in Snow and Ice Crystal Icing

Geometric descriptors for the prediction of snowflake drag

Utilizing APTV to investigate the dynamics of polydisperse suspension flows beyond the dilute regime : Applying APTV to polydisperse suspensions flows

An imaging technique for determining the volume fraction of two-component droplets of immiscible fluids

Accelerated Particle Separation in a DLD Device at Re > 1 Investigated by Means of µPIV

Computational characterization of flow and turbulence in IC engine-relevant cooling channels: An LES- and Reynolds-stress-modeling study

Droplet Production and Handling in Microchannels Using Electric Fields

Durability of Superamphiphobic Polyester Fabrics in Simulated Aerodynamic Icing Conditions

Experimental Investigation of AdBlue Film Formation in a Generic SCR Test Bench and Numerical Analysis Using LES

Hydrodynamics of Supercooled Drops Encountering Solidification at Various Moments of Impact

On the multi-dimensional microparticle fractionation in a sharp-corner serpentine microchannel

On the Numerics of Electrical Phenomena in Thermo-Elasto-Hydrodynamic Rolling Contacts

Measurements and modelling of the residual mass upon impact of supercooled liquid drops

On the micro-PIV accuracy and reliability utilizing non-Gaussian particle images

PIV investigation of high Reynolds number submerged water jets at high-pressure ambient conditions

On the calibration of Astigmatism particle tracking velocimetry for suspensions of different volume fractions

Hydrodynamic Investigations of Rapidly Stretched Liquid Bridges

Ice Adhesion Strength and Durability of Nanostructured Coatings for Aerospace Applications

Numerische Modellierung der Aerodynamik der PKW-LKW Überholvorgänge mittels wirbelauflösender Turbulenzmodelle

Insights into leading edge vortex formation and detachment on a pitching and plunging flat plate

On the 3D distribution and size fractionation of microparticles in a serpentine microchannel

Utilizing the ball lens effect for astigmatism particle tracking velocimetry

Implementation of a method for the inverse calculation of the heat flux during the impact of a drop chain onto a heated surface

On the 3D distribution and size fractionation of microparticles in a serpentine microchannel

Utilizing the ball lens effect for astigmatism particle tracking velocimetry

Dilute suspensions in annular shear flow under gravity: simulation and experiment

Experimental investigation of cavitation induced air release

Combined Differential Interferometry and Long-range μPIV measurements of a temperature driven boundary layer flow

Analysis of the cavitating flow induced by an ultrasonic horn – Experimental investigation on the influence of actuation phase, amplitude and geometrical boundary conditions

Analysis of the cavitating flow induced by an ultrasonic horn : Numerical 3D simulation for the analysis of vapour structures and the assessment of erosion-sensitive areas