Detailansicht

Wissensnetz

Person

Frank Kern (1965-)

Chemiker

Name	Frank Kern
Zeit	1965- (Lebensdaten)
Ort	Kandel (Geburtsort) Deutschland
Geschlecht	männlich
Akademischer Grad bzw. Titel	Dr. rer nat. habil.
Beruf	Chemiker (charakteristischer Beruf)
Variante	F. Kern
Beziehung	Universität Stuttgart. Institut für Fertigungstechnologie Keramischer Bauteile
Weitere Angaben	Dissertation Universität Karlsruhe 1995. Habilitationsschrift Universität Stuttgart 2015, Fakultät Konstruktions-, Produktions- und Fahrzeugtechnik
Datensatztyp	Person
GND-Nummer	1123526311
Datensatz-ID	1123526311
Beteiligt an alle anzeigen Mechanical properties of an extremely tough 1.5 mol% yttria-stabilized zirconia material Adjustment of micro- and macroporosity of ß-TCP scaffolds using solid-stabilized foams as bone replacement Effect of simulated mastication on structural stability of prosthetic zirconia material after thermocycling aging Immobilization of TiO2 photocatalysts for water treatment in geopolymer based coatings Influence of the feedstock preparation on the properties of highly filled alumina green-body and sintered parts produced by fused deposition of ceramic PA-12-zirconia-alumina-cenospheres 3D printed composites : accelerated ageing and role of the sterilisation process for physicochemical properties Spark plasma sintering of electric discharge machinable 1.5Yb-1.5Sm-TZP-WC composites Alumina and zirconia-reinforced polyamide PA-12 composites for biomedical additive manufacturing Deposition of 3YSZ-TiC PVD coatings with high-power impulse magnetron sputtering (HiPIMS) Effect of calcination temperature on the phase composition, morphology, and thermal properties of ZrO2 and Al2O3 modified with APTES (3-aminopropyltriethoxysilane) Electrical discharge machinable ytterbia samaria co-stabilized zirconia tungsten carbide composites Wire electrical discharge machinability and load-bearing capacity of ATZ-WC composite ceramics Selektive laserinduzierte Metallisierung von 3D-Schaltungsträgern aus Aluminiumoxid Additive manufacturing of β-tricalcium phosphate components via Fused Deposition of Ceramics (FDC) Mechanical properties and electrical discharge machinability of alumina-10 vol% zirconia-28 vol% titanium nitride composites Mechanical properties of 2Y-TZP fabricated from detonation synthesized powder Properties of 2 mol% yttria stabilized zirconia-alumina-cerium hexaaluminate composites Surface Integrity Analysis of Ceramics Machined by Wire EDM Using Different Trim Cut Technologies ED-machinable Ceramics with Oxide Matrix: Influence of Particle Size and Volume Fraction of the Electrical Conductive Phase on the Mechanical and Electrical Properties and the EDM Characteristics Effects of Composition on Mechanical and ED-machining Characteristics of Zirconia toughened Alumina - Titanium Carbide (ZTA-TiC) Composite Ceramics Neue Oxidkeramiken und Nanocomposites für Hochleistungsanwendungen CIEC 14 : proceedings of the 14th Inter-Regional European Conference on Ceramics, 8th - 10th September 2014, Stuttgart, Germany CIEC 14 Conference Proceedings : Proceedings of the 14th European Inter-Regional Conference on Ceramics Novel Zirconia–Alumina Nanocomposites Combining High Strength and Toughness Untersuchungen zur heterogen katalysierten Gasphasentrimerisierung von Formaldehyd

Hinweis

Die Betaversion beinhaltet noch nicht alle Funktionen und Informationen des Katalogs des DNB-Portals. Falls Sie Informationen vermissen oder ein Medium bestellen wollen, besuchen Sie bitte die entsprechende Seite im Katalog des DNB-Portals über folgenden Link:

Katalog der Deutschen Nationalbibliothek

Frank Kern (1965-)

Mechanical properties of an extremely tough 1.5 mol% yttria-stabilized zirconia material

Adjustment of micro- and macroporosity of ß-TCP scaffolds using solid-stabilized foams as bone replacement

Effect of simulated mastication on structural stability of prosthetic zirconia material after thermocycling aging

Immobilization of TiO2 photocatalysts for water treatment in geopolymer based coatings

Influence of the feedstock preparation on the properties of highly filled alumina green-body and sintered parts produced by fused deposition of ceramic

PA-12-zirconia-alumina-cenospheres 3D printed composites : accelerated ageing and role of the sterilisation process for physicochemical properties

Spark plasma sintering of electric discharge machinable 1.5Yb-1.5Sm-TZP-WC composites

Alumina and zirconia-reinforced polyamide PA-12 composites for biomedical additive manufacturing

Deposition of 3YSZ-TiC PVD coatings with high-power impulse magnetron sputtering (HiPIMS)

Effect of calcination temperature on the phase composition, morphology, and thermal properties of ZrO2 and Al2O3 modified with APTES (3-aminopropyltriethoxysilane)

Electrical discharge machinable ytterbia samaria co-stabilized zirconia tungsten carbide composites

Wire electrical discharge machinability and load-bearing capacity of ATZ-WC composite ceramics

Selektive laserinduzierte Metallisierung von 3D-Schaltungsträgern aus Aluminiumoxid

Additive manufacturing of β-tricalcium phosphate components via Fused Deposition of Ceramics (FDC)

Mechanical properties and electrical discharge machinability of alumina-10 vol% zirconia-28 vol% titanium nitride composites

Mechanical properties of 2Y-TZP fabricated from detonation synthesized powder

Properties of 2 mol% yttria stabilized zirconia-alumina-cerium hexaaluminate composites

Surface Integrity Analysis of Ceramics Machined by Wire EDM Using Different Trim Cut Technologies

ED-machinable Ceramics with Oxide Matrix: Influence of Particle Size and Volume Fraction of the Electrical Conductive Phase on the Mechanical and Electrical Properties and the EDM Characteristics

Effects of Composition on Mechanical and ED-machining Characteristics of Zirconia toughened Alumina - Titanium Carbide (ZTA-TiC) Composite Ceramics

Neue Oxidkeramiken und Nanocomposites für Hochleistungsanwendungen

CIEC 14 : proceedings of the 14th Inter-Regional European Conference on Ceramics, 8th - 10th September 2014, Stuttgart, Germany

CIEC 14 Conference Proceedings : Proceedings of the 14th European Inter-Regional Conference on Ceramics

Novel Zirconia–Alumina Nanocomposites Combining High Strength and Toughness

Untersuchungen zur heterogen katalysierten Gasphasentrimerisierung von Formaldehyd