Detailansicht

Wissensnetz

Person

Andreas Ostendorf (1968-)

Fertigungsingenieur

Name	Andreas Ostendorf
Zeit	1968- (Lebensdaten)
Ort	Neuenkirchen (Landkreis Osnabrück) (Geburtsort) Deutschland
Geschlecht	männlich
Akademischer Grad bzw. Titel	Prof. Dr.-Ing. (an der Fakultät für Maschinenbau der Universität Hannover) (2000)
Beruf	Fertigungsingenieur (charakteristischer Beruf)
Variante	A. Ostendorf
Beziehung	Ruhr-Universität Bochum. Fakultät Maschinenbau (Lehrstuhl für Laseranwendungstechnik)
Datensatztyp	Person
GND-Nummer	142329568
Datensatz-ID	142329568
Beteiligt an alle anzeigen Pulse Duration Dependent Formation of Laser‐Induced Periodic Surface Structures in Atomic Layer Deposited MoS 2 The Second Laser Revolution in Chemistry: Emerging Laser Technologies for Precise Fabrication of Multifunctional Nanomaterials and Nanostructures Wafer‐Scale Demonstration of Polycrystalline MoS 2 Growth on 200 mm Glass and SiO 2/Si Substrates by Plasma‐Enhanced Atomic Layer Deposition Temperature-Controlled Laser Processing of Shape Memory Wires: Spherical Ends as Connectors for System Integration Optimizing directed energy deposition of polymers through melt pool temperature control: impact on physical properties of polyamide 12 parts Combined experimental and theoretical approach to improve measurement accuracy of temperature-dependent reflectance of copper for near-infrared lasers Combined experimental and theoretical approach to improve measurement accuracy of temperature-dependent reflectance of copper for near-infrared lasers Vergleichende Untersuchung von Nachbearbeitungsverfahren an mittels pulverbettbasiertem Laser-Strahlschmelzen gefertigten zellularen TPMS-Strukturen Temperature-Dependent Reflectance of Copper with Different Surface Conditions Measured at 1064 nm Ultrashort‐Pulsed‐Laser Annealing of Amorphous Atomic‐Layer‐Deposited MoS 2 Films Bessel beam generated LIPSS on NiTi wires Detection of per- and polyfluoroalkyl water contaminants with multiplexed 4D microcavities sensor Formation of low- and high-spatial frequency laser-induced periodic surface structures (LIPSSs) in ALD-deposited MoS2 Intelligent optical biosensing with multiplexed microresonator imaging Laser-induced thermochemical polishing of metals : Laser-induziertes thermochemisches Polieren von Metallen Nucleation and growth studies of large-area deposited WS2 on flexible substrates Intelligent Optical Microresonator Imaging Sensor for Early Stage Classification of Dynamical Variations Intelligent Optical Microresonator Imaging Sensor for Early Stage Classification of Dynamical Variations Formabtrag an mineralischen Gläsern mit ultrakurz gepulster Laserstrahlung Laser shock peening of NiTi alloy with femtosecond and nanosecond laser pulses The effect of laser nitriding on surface characteristics and wear resistance of NiTi alloy with low power fiber laser Structural colors with angle-insensitive optical properties generated by Morpho-inspired 2PP structures Benchmarking and Validation of a Combined CFD-Optics Solver for Micro-Scale Problems Structural colors with angle-insensitive optical properties generated by Morpho-inspired 2PP structures Biomimetic structural coloration with tunable degree of angle-independence generated by two-photon polymerization Tailored β‐Ketoiminato Complexes of Iron: Synthesis, Characterization, and Evaluation towards Solution‐Based Deposition of Iron Oxide Thin Films Untersuchungen zur Sub-100 nm Strukturierung von Hybridpolymeren mittels Zwei-Photonen Absorption und Anwendungen Synthesis of Magnetic Nanoparticles by Ultrashort Pulsed Laser Ablation of Iron in Different Liquids Nanostructured Fe 2 O 3 Processing via Water‐Assisted ALD and Low‐Temperature CVD from a Versatile Iron Ketoiminate Precursor Water Splitting: Nanostructured Fe 2 O 3 Processing via Water‐Assisted ALD and Low‐Temperature CVD from a Versatile Iron Ketoiminate Precursor (Adv. Mater. Interfaces 18/2017) Generation of bioinspired structural colors via two-photon polymerization Optical micromachining tool Optically induced nanostructures : biomedical and technical applications Optically Induced Nanostructures : Biomedical and Technical Applications Optically Induced Nanostructures : Biomedical and Technical Applications Comparison of in situ and ex situ methods for synthesis of two-photon polymerization polymer nanocomposites Comparison of in situ and ex situ methods for synthesis of two-photon polymerization polymer nanocomposites Correction to Comparison of in Situ and ex Situ methods for synthesis of two-photon polymerization polymer nanocomposites [Polymers, 6, (2014) 2037-2050] Generation of microfluidic flow using an optically assembled and magnetically driven microrotor Laser als Werkzeug für die Mikro- und Nanostrukturierung : und die darin aufgeführten wissenschaftlichen Publikationen E1-E51 Laser als Werkzeug für die Mikro- und Nanostrukturierung und die darin aufgeführten wissenschaftlichen Publikationen E1 - E51 Laser-Assemblierung komplexer Mikrostrukturen mit sphärischen Partikeln Untersuchung des Abtrags dünner Metallschichten mit ultrakurzen Laserpulsen System design of optical trapping setups Adaptive CAD-Modelle zur Kompensation von Formabweichungen beim Laserschneiden : Ergebnisse eines Vorhabens der industriellen Gemeinschaftsforschung (IGF) Untersuchungen zum Präzisionsabtrag mit VUV-Laserstrahlung und ultrakurzen Laserpulsen Produktionsverfahren für die flexible Mikrostrukturierung passiver optischer Bauteile : Abschlussbericht des Verbundprojektes PROMIS ; mit Tabellen

Hinweis

Die Betaversion beinhaltet noch nicht alle Funktionen und Informationen des Katalogs des DNB-Portals. Falls Sie Informationen vermissen oder ein Medium bestellen wollen, besuchen Sie bitte die entsprechende Seite im Katalog des DNB-Portals über folgenden Link:

Katalog der Deutschen Nationalbibliothek

Andreas Ostendorf (1968-)

Pulse Duration Dependent Formation of Laser‐Induced Periodic Surface Structures in Atomic Layer Deposited MoS 2

The Second Laser Revolution in Chemistry: Emerging Laser Technologies for Precise Fabrication of Multifunctional Nanomaterials and Nanostructures

Wafer‐Scale Demonstration of Polycrystalline MoS 2 Growth on 200 mm Glass and SiO 2/Si Substrates by Plasma‐Enhanced Atomic Layer Deposition

Temperature-Controlled Laser Processing of Shape Memory Wires: Spherical Ends as Connectors for System Integration

Optimizing directed energy deposition of polymers through melt pool temperature control: impact on physical properties of polyamide 12 parts

Combined experimental and theoretical approach to improve measurement accuracy of temperature-dependent reflectance of copper for near-infrared lasers

Combined experimental and theoretical approach to improve measurement accuracy of temperature-dependent reflectance of copper for near-infrared lasers

Vergleichende Untersuchung von Nachbearbeitungsverfahren an mittels pulverbettbasiertem Laser-Strahlschmelzen gefertigten zellularen TPMS-Strukturen

Temperature-Dependent Reflectance of Copper with Different Surface Conditions Measured at 1064 nm

Ultrashort‐Pulsed‐Laser Annealing of Amorphous Atomic‐Layer‐Deposited MoS 2 Films

Bessel beam generated LIPSS on NiTi wires

Detection of per- and polyfluoroalkyl water contaminants with multiplexed 4D microcavities sensor

Formation of low- and high-spatial frequency laser-induced periodic surface structures (LIPSSs) in ALD-deposited MoS2

Intelligent optical biosensing with multiplexed microresonator imaging

Laser-induced thermochemical polishing of metals : Laser-induziertes thermochemisches Polieren von Metallen

Nucleation and growth studies of large-area deposited WS2 on flexible substrates

Intelligent Optical Microresonator Imaging Sensor for Early Stage Classification of Dynamical Variations

Intelligent Optical Microresonator Imaging Sensor for Early Stage Classification of Dynamical Variations

Formabtrag an mineralischen Gläsern mit ultrakurz gepulster Laserstrahlung

Laser shock peening of NiTi alloy with femtosecond and nanosecond laser pulses

The effect of laser nitriding on surface characteristics and wear resistance of NiTi alloy with low power fiber laser

Structural colors with angle-insensitive optical properties generated by Morpho-inspired 2PP structures

Benchmarking and Validation of a Combined CFD-Optics Solver for Micro-Scale Problems

Structural colors with angle-insensitive optical properties generated by Morpho-inspired 2PP structures

Biomimetic structural coloration with tunable degree of angle-independence generated by two-photon polymerization

Tailored β‐Ketoiminato Complexes of Iron: Synthesis, Characterization, and Evaluation towards Solution‐Based Deposition of Iron Oxide Thin Films

Untersuchungen zur Sub-100 nm Strukturierung von Hybridpolymeren mittels Zwei-Photonen Absorption und Anwendungen

Synthesis of Magnetic Nanoparticles by Ultrashort Pulsed Laser Ablation of Iron in Different Liquids

Nanostructured Fe 2 O 3 Processing via Water‐Assisted ALD and Low‐Temperature CVD from a Versatile Iron Ketoiminate Precursor

Water Splitting: Nanostructured Fe 2 O 3 Processing via Water‐Assisted ALD and Low‐Temperature CVD from a Versatile Iron Ketoiminate Precursor (Adv. Mater. Interfaces 18/2017)

Generation of bioinspired structural colors via two-photon polymerization

Optical micromachining tool

Optically induced nanostructures : biomedical and technical applications

Optically Induced Nanostructures : Biomedical and Technical Applications

Optically Induced Nanostructures : Biomedical and Technical Applications

Comparison of in situ and ex situ methods for synthesis of two-photon polymerization polymer nanocomposites

Comparison of in situ and ex situ methods for synthesis of two-photon polymerization polymer nanocomposites

Correction to Comparison of in Situ and ex Situ methods for synthesis of two-photon polymerization polymer nanocomposites [Polymers, 6, (2014) 2037-2050]

Generation of microfluidic flow using an optically assembled and magnetically driven microrotor

Laser als Werkzeug für die Mikro- und Nanostrukturierung : und die darin aufgeführten wissenschaftlichen Publikationen E1-E51

Laser als Werkzeug für die Mikro- und Nanostrukturierung und die darin aufgeführten wissenschaftlichen Publikationen E1 - E51

Laser-Assemblierung komplexer Mikrostrukturen mit sphärischen Partikeln

Untersuchung des Abtrags dünner Metallschichten mit ultrakurzen Laserpulsen

System design of optical trapping setups

Adaptive CAD-Modelle zur Kompensation von Formabweichungen beim Laserschneiden : Ergebnisse eines Vorhabens der industriellen Gemeinschaftsforschung (IGF)

Untersuchungen zum Präzisionsabtrag mit VUV-Laserstrahlung und ultrakurzen Laserpulsen

Produktionsverfahren für die flexible Mikrostrukturierung passiver optischer Bauteile : Abschlussbericht des Verbundprojektes PROMIS ; mit Tabellen