Detail page

Knowledge Web

Person

Christian Bonten (1969-)

Maschinenbauingenieur

Name	Christian Bonten
Time	1969- (Date of birth and death)
Place	Krefeld (Geburtsort) Deutschland
Gender	männlich
Academic degree	Prof. Dr.-Ing.
Profession	Maschinenbauingenieur (characteristic profession) Hochschullehrer
Variant	C. Bonten
Related	Universität Stuttgart Kunststoffverarbeitung (Thema)
Further information	Studium des Maschinenbaus in Duisburg und der Kunststoﬀverarbeitung an der RWTH in Aachen; erhielt 2007 den Dr. Richard-Escales-Preis; seit 1. September 2010 Leiter des Instituts für Kunststofftechnik IKT der Univ. Stuttgart
Record type	Person
GND-Identifier	1012186105
Record ID	1012186105
Involved in show all Weather-responsive adaptive shading through biobased and bioinspired hygromorphic 4D-printing Biobased Immiscible Polylactic Acid (PLA): Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior A novel in-line measurement and analysis method of bubble growth-dependent strain and deformation rates during foaming Biobased Immiscible Polylactic Acid (PLA) : Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior Degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced with regenerated cellulose fibers Prediction of the bubble growth behavior by means of the time-, temperature-, pressure- and blowing agent concentration-dependent transient elongational viscosity function of polymers Weather-responsive adaptive shading through biobased and bioinspired hygromorphic 4D-printing Werkstoffentwicklung im Doppelschneckenextruder für das mechanische Recycling des Biokunststoffs Polyhydroxybutyrat Werkstoffentwicklung im Doppelschneckenextruder für das mechanische Recycling des Biokunststoffs Polyhydroxybutyrat 28. Stuttgarter Kunststoffkolloquium : 28. Februar-2. März 2023 Beitrag zur Vorhersage des spezifischen Volumens während des Erstarrungsvorgangs bei der Verarbeitung von Kunststoffschmelzen Compounding, rheology and numerical simulation of highly filled graphite compounds for potential fuel cell applications Deformation behavior investigation of auxetic structure made of poly(butylene adipate-co-terephthalate) biopolymers using finite element method Deformation behavior of 3D printed auxetic structures of thermoplastic polymers : PLA, PBAT, and blends Experimental and simulative analysis of the pressure development in a closed injection pultrusion process with multiple chamber geometries Investigation of auxetic structural deformation behavior of PBAT polymers using process and finite element simulation Mechanical properties of 3D-printed liquid crystalline polymers with low and high melting temperatures Vorhersage des Aufschmelzvorgangs von Kunststoffen in partikelbeladenen Strömungen mittels CFD-DEM In situ laboratory for plastic degradation in the Red Sea Analysen zum Kunststoff im Restmüll der Stadt Augsburg : Potential für eine regionale Kreislaufwirtschaft? In-line measurement and modeling of temperature, pressure, and blowing agent dependent viscosity of polymer melts Comparative analysis of the solid conveying of regrind, virgin and powdery polyolefins in single-screw extrusion Experimental investigation of the solid conveying behavior of smooth and grooved single-screw extruders at high screw speeds Glass transition of PLA-CO₂ mixtures after solid-state saturation Inline-Charakterisierung und Vorhersage der Viskosität sowie des initialen Blasenwachstumsverhaltens beim Schäumen von treibmittelbeladenen Kunststoffschmelzen Simulation der Strömungen von Kunststoffschmelzen in Extrusionsprozessen mithilfe einer Immersed-Boundary-Methode Vorhersage des Verformungsverhaltens langfaserverstärkter Thermoplaste unter ganzheitlicher Berücksichtigung der verarbeitungsbedingten Fasermikrostruktur Optimization of tensile strength of PLA/clay/rice husk composites using Box-Behnken design A novel modeling approach for plastics melting within a CFD-DEM framework Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Compression Properties Enhanced processing of regrind as recycling material in single-screw extruders Investigation of the thermal and hydrolytic degradation of polylactide during autoclave foaming Miscibility and phase separation in PMMA/SAN blends investigated by nanoscale AFM-IR Rheological characterization and modeling of thermally unstable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Rigid amorphous fraction as an indicator for polymer-polymer interactions in highly filled plastics Additive manufacturing of β-tricalcium phosphate components via Fused Deposition of Ceramics (FDC) Calibration of fiber orientation simulations for LFT : a new approach Das Erwärmungsverhalten thermoplastischer Faserkunststoffverbunde durch Ausnutzung des Joule’schen Effekts Direct Joule heating as a means to efficiently and homogeneously heat thermoplastic prepregs Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA) Insights into the processing of recycled carbon fibers via injection molding compounding Kunststofftechnik : Einführung und Grundlagen Kunststofftechnik : Einführung und Grundlagen Review on the biological degradation of polymers in various environments Rheology in the presence of carbon dioxide (CO2) to study the melt behavior of chemically modified polylactide (PLA) Influence of Particle Size and Phase Connectivity on the Fracture Behavior of PA6/EOR Blends Chemical Modification and Foam Processing of Polylactide (PLA) Plastics technology : introduction and fundamentals Plastics Technology : Introduction and Fundamentals Extrusion-based 3D printing of poly(ethylene glycol) diacrylate hydrogels containing positively and negatively charged groups Kunststofftechnik : Einführung und Grundlagen Kunststofftechnik : Einführung und Grundlagen Kunststofftechnik : Einführung und Grundlagen Kunststofftechnik : Einführung und Grundlagen Kunststofftechnik : Einführung und Grundlagen ; [extra, mit kostenlosem E-Book] 23. Stuttgarter Kunststoff-Kolloquium : 6. - 7. März 2013 ; [Beiträge zum 23. Stuttgarter Kunststoff-Kolloquium] 22. Stuttgarter Kunststoff-Kolloquium : 16. - 17. März 2011 Plastics and composites welding handbook Kunststofftechnik für Designer Aging and chemical resistance

Please note

The beta version does not yet contain all functions and information of the DNB portal catalogue. If you are missing information or want to order a medium, please visit the page in the DNB portal catalogue via the following link:

Katalog der Deutschen Nationalbibliothek

Christian Bonten (1969-)

Weather-responsive adaptive shading through biobased and bioinspired hygromorphic 4D-printing

Biobased Immiscible Polylactic Acid (PLA): Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior

A novel in-line measurement and analysis method of bubble growth-dependent strain and deformation rates during foaming

Biobased Immiscible Polylactic Acid (PLA) : Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) Blends: Impact of Rheological and Non-isothermal Crystallization on the Bead Foaming Behavior

Degradation of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) reinforced with regenerated cellulose fibers

Prediction of the bubble growth behavior by means of the time-, temperature-, pressure- and blowing agent concentration-dependent transient elongational viscosity function of polymers

Weather-responsive adaptive shading through biobased and bioinspired hygromorphic 4D-printing

Werkstoffentwicklung im Doppelschneckenextruder für das mechanische Recycling des Biokunststoffs Polyhydroxybutyrat

Werkstoffentwicklung im Doppelschneckenextruder für das mechanische Recycling des Biokunststoffs Polyhydroxybutyrat

28. Stuttgarter Kunststoffkolloquium : 28. Februar-2. März 2023

Beitrag zur Vorhersage des spezifischen Volumens während des Erstarrungsvorgangs bei der Verarbeitung von Kunststoffschmelzen

Compounding, rheology and numerical simulation of highly filled graphite compounds for potential fuel cell applications

Deformation behavior investigation of auxetic structure made of poly(butylene adipate-co-terephthalate) biopolymers using finite element method

Deformation behavior of 3D printed auxetic structures of thermoplastic polymers : PLA, PBAT, and blends

Experimental and simulative analysis of the pressure development in a closed injection pultrusion process with multiple chamber geometries

Investigation of auxetic structural deformation behavior of PBAT polymers using process and finite element simulation

Mechanical properties of 3D-printed liquid crystalline polymers with low and high melting temperatures

Vorhersage des Aufschmelzvorgangs von Kunststoffen in partikelbeladenen Strömungen mittels CFD-DEM

In situ laboratory for plastic degradation in the Red Sea

Analysen zum Kunststoff im Restmüll der Stadt Augsburg : Potential für eine regionale Kreislaufwirtschaft?

In-line measurement and modeling of temperature, pressure, and blowing agent dependent viscosity of polymer melts

Comparative analysis of the solid conveying of regrind, virgin and powdery polyolefins in single-screw extrusion

Experimental investigation of the solid conveying behavior of smooth and grooved single-screw extruders at high screw speeds

Glass transition of PLA-CO₂ mixtures after solid-state saturation

Inline-Charakterisierung und Vorhersage der Viskosität sowie des initialen Blasenwachstumsverhaltens beim Schäumen von treibmittelbeladenen Kunststoffschmelzen

Simulation der Strömungen von Kunststoffschmelzen in Extrusionsprozessen mithilfe einer Immersed-Boundary-Methode

Vorhersage des Verformungsverhaltens langfaserverstärkter Thermoplaste unter ganzheitlicher Berücksichtigung der verarbeitungsbedingten Fasermikrostruktur

Optimization of tensile strength of PLA/clay/rice husk composites using Box-Behnken design

A novel modeling approach for plastics melting within a CFD-DEM framework

Amorphous Polylactide Bead Foam : Effect of Talc and Chain Extension on Foaming Behavior and Compression Properties

Enhanced processing of regrind as recycling material in single-screw extruders

Investigation of the thermal and hydrolytic degradation of polylactide during autoclave foaming

Miscibility and phase separation in PMMA/SAN blends investigated by nanoscale AFM-IR

Rheological characterization and modeling of thermally unstable poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV)

Rigid amorphous fraction as an indicator for polymer-polymer interactions in highly filled plastics

Additive manufacturing of β-tricalcium phosphate components via Fused Deposition of Ceramics (FDC)

Calibration of fiber orientation simulations for LFT : a new approach

Das Erwärmungsverhalten thermoplastischer Faserkunststoffverbunde durch Ausnutzung des Joule’schen Effekts

Direct Joule heating as a means to efficiently and homogeneously heat thermoplastic prepregs

Evaluation of the Zero Shear Viscosity, the D-Content and Processing Conditions as Foam Relevant Parameters for Autoclave Foaming of Standard Polylactide (PLA)

Insights into the processing of recycled carbon fibers via injection molding compounding

Kunststofftechnik : Einführung und Grundlagen

Kunststofftechnik : Einführung und Grundlagen

Review on the biological degradation of polymers in various environments

Rheology in the presence of carbon dioxide (CO2) to study the melt behavior of chemically modified polylactide (PLA)

Influence of Particle Size and Phase Connectivity on the Fracture Behavior of PA6/EOR Blends

Chemical Modification and Foam Processing of Polylactide (PLA)

Plastics technology : introduction and fundamentals

Plastics Technology : Introduction and Fundamentals

Extrusion-based 3D printing of poly(ethylene glycol) diacrylate hydrogels containing positively and negatively charged groups

Kunststofftechnik : Einführung und Grundlagen

Kunststofftechnik : Einführung und Grundlagen

Kunststofftechnik : Einführung und Grundlagen

Kunststofftechnik : Einführung und Grundlagen

Kunststofftechnik : Einführung und Grundlagen ; [extra, mit kostenlosem E-Book]

23. Stuttgarter Kunststoff-Kolloquium : 6. - 7. März 2013 ; [Beiträge zum 23. Stuttgarter Kunststoff-Kolloquium]

22. Stuttgarter Kunststoff-Kolloquium : 16. - 17. März 2011

Plastics and composites welding handbook

Kunststofftechnik für Designer

Aging and chemical resistance