Detail page

Knowledge Web

Person

Olena Volkova (1973-)

Name	Olena Volkova
Time	1973- (Date of birth and death)
Place	Dnepropetrovsk (Ukraine) (Geburtsort) Ukraine Deutschland
Gender	weiblich
Academic degree	Prof. Dr.-Ing.
Related	Technische Universität Bergakademie Freiberg. Institut für Eisen- und Stahltechnologie
Further information	Diss. TU Bergakademie Freiberg, Fakultät für Werkstoffwissenschaft und Werkstofftechnologie
Source	AM Metadaten
Record type	Person
GND-Identifier	128577169
Record ID	128577169
Involved in show all Influence of an Electromagnetic Field on Direct Reduction of Iron Oxide Using Hydrogen as a Reducing Agent Characterization of CrMnNi Steel Powders Obtained via Gas Atomization Corrosion of MgO–C Refractory with Ladle Slags Density, Surface Tension, and Viscosity of Liquid Low-Sulfur Manganese-Boron Steel via Maximum Bubble Pressure and Oscillating Crucible Methods Direct Reduction of Solid V2O5 with Hydrogen at 600-1400 °C Extraordinary Mechanical Properties of a Field-Assisted Sintering Technique/Spark Plasma Sintering Consolidated Stainless Steel with High Copper Content of 9 wt% Oxidation Behavior of MgO-C Refractories Containing Metallic Aluminum, Calcium Magnesium Aluminate Aggregates, and Carbores P Interactions between Molten High‐Silicon Electrical Steels and Carbon‐Bonded MgO Refractories Based on Recyclates Interaction between Molten Al‐Killed Mn–B Steel and Carbon‐Bonded MgO Refractories Based on Recyclates Power‐to‐X Processes with Synthetic Iron Oxides Effect of Oxygen on Thermophysical Properties of Molten High-Silicon Electrical Steels and Its Impact on Bubble Formation Behavior Methods for Thermal Conductivity and Thermal Diffusivity Measurements of Solid and Molten Mold Fluxes Extraction of Vanadium from CaO–SiO 2 –MgO–Al 2 O 3 Slags Based on Vaporization of Vanadium Pentoxide Beitrag zur Gefügeausbildung und mechanische Eigenschaften Plasma-WIG-geschweißter CrMnNiN-Stähle Interactions between 3Al 2 O 3 ·2SiO 2, CA 2, CA 6, and Molten Slags The Effect of Bake Hardening on Quenched and Partitioned AISI 420 Stainless Steel Extraordinary Mechanical Properties of a Field‐Assisted Sintering Technique/Spark Plasma Sintering Consolidated Stainless Steel with High Copper Content of 9 wt% Phosphorus Partition in an Industrial Basic Oxygen Furnace Process in Ukraine Effect of Austenite Reversion Treatment and Partitioning on the Phase Transformation Behavior and Mechanical Properties of Martensitic–Austenitic CrMnNi‐Cast Steel Direct Reduction of Solid V 2 O 5 with Hydrogen at 600–1400 °C Numerical Simulation of Blast Furnace Hearth Maintenance Measures Investigation of Sulfur Influence on the Atomization of Stainless Steels Densities, Surface Tensions, and Viscosities of Molten High‐Silicon Electrical Steels with Different Silicon Contents Density, Surface Tension, and Viscosity of Liquid Low‐Sulfur Manganese–Boron Steel via Maximum Bubble Pressure and Oscillating Crucible Methods Effect of SiO 2 and Al 2 O 3 on the Thermophysical Properties and the Foaming Index of Electric Arc Interface Slag from the Production of Construction Steel Characterization of CrMnNi Steel Powders Obtained via Gas Atomization Oxidation Behavior of MgO‐C Refractories Containing Metallic Aluminum, Calcium Magnesium Aluminate Aggregates, and Carbores P High‐Strength Nonoriented Electrical Steel with Excellent Magnetic Properties Accomplished by Cu–Ni Multialloying Viscosity, Density, Surface Tension, and Crystallization Behavior of Commercial Mold Fluxes Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N Effects of Cu Content on Mechanical and Magnetic Properties of High‐Strength Nonoriented Silicon Steel Corrosion of MgO–C Refractory with Ladle Slags Remelting of In Situ Fe‐ x TiC Metal Matrix Composites by the Sessile Drop Method: Characteristic Temperatures and Microstructural Analysis Extraction of Vanadium from CaO–SiO 2 –MgO–Al 2 O 3 Slags Based on Vaporization of Vanadium Pentoxide Thermophysical Properties of CaO–SiO 2 –Al 2 O 3 –MgO–TiO 2 –FeO x –V 2 O 3 Slag with CaO/SiO 2 = 1.13 with Different TiO 2 and V 2 O 3 Additions Effect of Calcium Addition on the Aluminum Alloy A201 Foam Thermodynamic Analysis of the Oxidation Behavior of Cerium in High‐Speed Steel during Electroslag Remelting Density, Surface Tension, and Viscosity of Molten Ni‐Based Superalloys Using the Maximum Bubble Pressure and Oscillating Crucible Methods Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures The Recycling of Vanadium from Steelmaking Slags: A Review Surface treatment of additively manufactured high-alloy austenitic steel parts with the aim of prolonging the fatigue life Development and characterization of MgO and TiO2 reinforced steel ceramic composites resistant to long-term contact with liquid aluminium alloys Development and characterization of MgO and TiO2 reinforced Steel Ceramic Composites resistant to long-term contact with liquid aluminum alloys Modification of Liquid Steel Viscosity and Surface Tension for Inert Gas Atomization of Metal Powder Wasserstoffreduktion der Eisenerzpellets und H2-Recycling metallurgischer Stäube Cold Crucible Induction Melting for the Fabrication of Fe– x TiC In Situ Metal Matrix Composites: Alloying Efficiency and Microstructural Analysis Modeling of Mechanical Properties of Metastable Austenitic Cr–Mn–Ni Steels with TRIP Effect Reduction of Iron‐Ore Pellets Using Different Gas Mixtures and Temperatures Influence of SiO 2 ‐Adding on the Thermophysical Properties and Crystallization Behavior of Ladle Slags Swelling Behavior of Iron Ore Pellets during Reduction in H 2 and N 2/H 2 Atmospheres at Different Temperatures Phosphorus Partition Between Liquid Crude Steel and High-Basicity Basic Oxygen Furnace Slags Containing V2O5 Determination of Martensite Formation Rate by Magnetic In Situ Measurement in CrMnNi–N Steel Effect of Al 2 O 3 and TiO 2 on Viscosity, Surface Tension, and Density of Blast Furnace Slag with CaO/SiO 2 = 1.13 Hydrogen Embrittlement in a Plasma Tungsten Inert Gas‐Welded Austenitic CrMnNi Stainless Steel Extraction of vanadium from secondary sources Processing-structure-mechanical property relationships in high carbon medium manganese steels with austenitic microstructure Wärmeleitung durch Schlackenschichten : Heat conduction through slag layers Manufacturing and Characterization of Plasma Gas Tungsten Arc-Welded Pipes Made of a Ni-Reduced Austenitic Stainless CrMnNi Steel Evaluation of nitrogen content on pitting and repassivation behavior of a high alloy nickel‐reduced austenitic stainless steel Effect of Ordered Phases and Microstructures on the Iron Loss of 6.5 wt% Si Electrical Steel Quenched at Various Cooling Rates

Please note

The beta version does not yet contain all functions and information of the DNB portal catalogue. If you are missing information or want to order a medium, please visit the page in the DNB portal catalogue via the following link:

Katalog der Deutschen Nationalbibliothek

Olena Volkova (1973-)

Influence of an Electromagnetic Field on Direct Reduction of Iron Oxide Using Hydrogen as a Reducing Agent

Characterization of CrMnNi Steel Powders Obtained via Gas Atomization

Corrosion of MgO–C Refractory with Ladle Slags

Density, Surface Tension, and Viscosity of Liquid Low-Sulfur Manganese-Boron Steel via Maximum Bubble Pressure and Oscillating Crucible Methods

Direct Reduction of Solid V2O5 with Hydrogen at 600-1400 °C

Extraordinary Mechanical Properties of a Field-Assisted Sintering Technique/Spark Plasma Sintering Consolidated Stainless Steel with High Copper Content of 9 wt%

Oxidation Behavior of MgO-C Refractories Containing Metallic Aluminum, Calcium Magnesium Aluminate Aggregates, and Carbores P

Interactions between Molten High‐Silicon Electrical Steels and Carbon‐Bonded MgO Refractories Based on Recyclates

Interaction between Molten Al‐Killed Mn–B Steel and Carbon‐Bonded MgO Refractories Based on Recyclates

Power‐to‐X Processes with Synthetic Iron Oxides

Effect of Oxygen on Thermophysical Properties of Molten High-Silicon Electrical Steels and Its Impact on Bubble Formation Behavior

Methods for Thermal Conductivity and Thermal Diffusivity Measurements of Solid and Molten Mold Fluxes

Extraction of Vanadium from CaO–SiO 2 –MgO–Al 2 O 3 Slags Based on Vaporization of Vanadium Pentoxide

Beitrag zur Gefügeausbildung und mechanische Eigenschaften Plasma-WIG-geschweißter CrMnNiN-Stähle

Interactions between 3Al 2 O 3 ·2SiO 2, CA 2, CA 6, and Molten Slags

The Effect of Bake Hardening on Quenched and Partitioned AISI 420 Stainless Steel

Extraordinary Mechanical Properties of a Field‐Assisted Sintering Technique/Spark Plasma Sintering Consolidated Stainless Steel with High Copper Content of 9 wt%

Phosphorus Partition in an Industrial Basic Oxygen Furnace Process in Ukraine

Effect of Austenite Reversion Treatment and Partitioning on the Phase Transformation Behavior and Mechanical Properties of Martensitic–Austenitic CrMnNi‐Cast Steel

Direct Reduction of Solid V 2 O 5 with Hydrogen at 600–1400 °C

Numerical Simulation of Blast Furnace Hearth Maintenance Measures

Investigation of Sulfur Influence on the Atomization of Stainless Steels

Densities, Surface Tensions, and Viscosities of Molten High‐Silicon Electrical Steels with Different Silicon Contents

Density, Surface Tension, and Viscosity of Liquid Low‐Sulfur Manganese–Boron Steel via Maximum Bubble Pressure and Oscillating Crucible Methods

Effect of SiO 2 and Al 2 O 3 on the Thermophysical Properties and the Foaming Index of Electric Arc Interface Slag from the Production of Construction Steel

Characterization of CrMnNi Steel Powders Obtained via Gas Atomization

Oxidation Behavior of MgO‐C Refractories Containing Metallic Aluminum, Calcium Magnesium Aluminate Aggregates, and Carbores P

High‐Strength Nonoriented Electrical Steel with Excellent Magnetic Properties Accomplished by Cu–Ni Multialloying

Viscosity, Density, Surface Tension, and Crystallization Behavior of Commercial Mold Fluxes

Solidification of Tungsten Inert Gas–Welded Austenitic Stainless Steel with 0.17 wt% N

Effects of Cu Content on Mechanical and Magnetic Properties of High‐Strength Nonoriented Silicon Steel

Corrosion of MgO–C Refractory with Ladle Slags

Remelting of In Situ Fe‐ x TiC Metal Matrix Composites by the Sessile Drop Method: Characteristic Temperatures and Microstructural Analysis

Extraction of Vanadium from CaO–SiO 2 –MgO–Al 2 O 3 Slags Based on Vaporization of Vanadium Pentoxide

Thermophysical Properties of CaO–SiO 2 –Al 2 O 3 –MgO–TiO 2 –FeO x –V 2 O 3 Slag with CaO/SiO 2 = 1.13 with Different TiO 2 and V 2 O 3 Additions

Effect of Calcium Addition on the Aluminum Alloy A201 Foam

Thermodynamic Analysis of the Oxidation Behavior of Cerium in High‐Speed Steel during Electroslag Remelting

Density, Surface Tension, and Viscosity of Molten Ni‐Based Superalloys Using the Maximum Bubble Pressure and Oscillating Crucible Methods

Results of Hydrogen Reduction of Iron Ore Pellets at Different Temperatures

The Recycling of Vanadium from Steelmaking Slags: A Review

Surface treatment of additively manufactured high-alloy austenitic steel parts with the aim of prolonging the fatigue life

Development and characterization of MgO and TiO2 reinforced steel ceramic composites resistant to long-term contact with liquid aluminium alloys

Development and characterization of MgO and TiO2 reinforced Steel Ceramic Composites resistant to long-term contact with liquid aluminum alloys

Modification of Liquid Steel Viscosity and Surface Tension for Inert Gas Atomization of Metal Powder

Wasserstoffreduktion der Eisenerzpellets und H2-Recycling metallurgischer Stäube

Cold Crucible Induction Melting for the Fabrication of Fe– x TiC In Situ Metal Matrix Composites: Alloying Efficiency and Microstructural Analysis

Modeling of Mechanical Properties of Metastable Austenitic Cr–Mn–Ni Steels with TRIP Effect

Reduction of Iron‐Ore Pellets Using Different Gas Mixtures and Temperatures

Influence of SiO 2 ‐Adding on the Thermophysical Properties and Crystallization Behavior of Ladle Slags

Swelling Behavior of Iron Ore Pellets during Reduction in H 2 and N 2/H 2 Atmospheres at Different Temperatures

Phosphorus Partition Between Liquid Crude Steel and High-Basicity Basic Oxygen Furnace Slags Containing V2O5

Determination of Martensite Formation Rate by Magnetic In Situ Measurement in CrMnNi–N Steel

Effect of Al 2 O 3 and TiO 2 on Viscosity, Surface Tension, and Density of Blast Furnace Slag with CaO/SiO 2 = 1.13

Hydrogen Embrittlement in a Plasma Tungsten Inert Gas‐Welded Austenitic CrMnNi Stainless Steel

Extraction of vanadium from secondary sources

Processing-structure-mechanical property relationships in high carbon medium manganese steels with austenitic microstructure

Wärmeleitung durch Schlackenschichten : Heat conduction through slag layers

Manufacturing and Characterization of Plasma Gas Tungsten Arc-Welded Pipes Made of a Ni-Reduced Austenitic Stainless CrMnNi Steel

Evaluation of nitrogen content on pitting and repassivation behavior of a high alloy nickel‐reduced austenitic stainless steel

Effect of Ordered Phases and Microstructures on the Iron Loss of 6.5 wt% Si Electrical Steel Quenched at Various Cooling Rates