Detail page

Knowledge Web

Person

Dieter Krause (1962-)

Leiter des Instituts für Produktentwicklung und Konstruktionstechnik an der Technischen Universität Hamburg

Name	Dieter Krause
Time	1962- (Date of birth and death)
Place	Erlangen (Geburtsort) Hamburg (Wirkungsort) Deutschland
Gender	männlich
Academic degree	Prof. Dr.-Ing.
Profession	Leiter des Instituts für Produktentwicklung und Konstruktionstechnik an der Technischen Universität Hamburg (characteristic profession) Hochschullehrer Ingenieur
Variant	D. Krause
Related	Technische Universität Hamburg-Harburg Technische Universität Hamburg Technische Universität Hamburg. Institut für Produktentwicklung und Konstruktionstechnik Technische Universität Hamburg-Harburg. Institut für Produktentwicklung und Konstruktionstechnik Fertigungstechnik (Studienfach)
Further information	ab 2005 Leiter des Instituts für Produktentwicklung und Konstruktionstechnik an der Technischen Universität Hamburg
Record type	Person
GND-Identifier	143370189
Record ID	143370189
Involved in show all Microelectronic modular system for sensor-integrating machine elements—model-based configuration and prototypical implementation of sensor-integrating bolts A new design method to account for interlaminar stresses in laminated composites using machine learning Ansatz zur Berücksichtigung von Obsoleszenz im Rahmen der Entwicklung modularer Produktfamilien Approach for investigation of CFRP tribological stressed interfaces through levels of abstraction Appropriate consideration of interfaces in product development Buckling tests of cylindrical composite shells in multiaxial loading Challenges in addressing sustainability within product development Determination of the right level of detail: A methodical approach for life cycle costing integration in product development Development and validation of a novel stenosis model for percutaneous transluminal angioplasty training of the internal carotid artery Development of an anthropomorphic phantom of the lower extremities for feasibility studies and verification of total-body irradiation Enhancing end-of-life sustainability through modularity and interface design in product development Experimental Investigation of the Vibration Behaviour of Variant GFRP Sandwich Panels in Thermal Environment Flexibility evaluation of modules with a focus on interfaces Ganzheitliche Nachhaltigkeitsbewertung und -optimierung unter Nutzung kartografischer Generalisierung Leveraging generative AI tools for design method support: insights, challenges, and best practices Lifecycle-oriented interface standardization in modular product families: drivers and trade-offs across phases MBfX: proposing semantics for systematically applying system modelling techniques across different applications and domains Microelectronic modular system for sensor-integrating machine elements—model-based configuration and prototypical implementation of sensor-integrating bolts Middle meningeal artery model for training endovascular treatment of chronic subdural hematomas in interventional neuroradiology Model of the Venous System for Training Endovascular Treatment in Interventional Neuroradiology Procedure for the multi-objective design and sustainability optimization of composite sandwich structures in aircraft cabin applications Produktentwicklung und Konstruktionstechnik : Forschungserkenntnisse und -projekte der Jahre 2021 bis 2025 Scenario-based planning of design method validation studies and the associated effort Supporting medical phantom design through a comprehensive design catalogue for phantom materials Towards an indicator for assessing the potential for geometric standardization in the development of variant lightweight products Towards improving the information management of aircraft cabin retrofits by processing quantity-on-hand documents Towards mechanical vibration control by dynamically adaptive impedance elements in vibration testing : Ansatz zur mechanischen Schwingungsbeeinflussung mittels Dynamisch Adaptiver Impedanzelemente in der Versuchstechnik Vibration reduction of lightweight structures through adjustable damping and stiffness properties at their interfaces 3D printed phantoms for medical imaging: recent developments and challenges Hochpräzise Funktionsflächen an CFK-Bauteilen : Untersuchung der Schleifverfahren, des tribologischen Verhaltens und der Nutzungsphase am Beispiel von Motorspindelkomponenten aus Kohlenstofffaser-Kunststoff-Verbunden (CFK) Developing and Testing of a 3D Printed Middle Meningeal Artery Model for Training in Interventional Neuroradiology 3D printed phantoms for medical imaging : recent developments and challenges A review on sensor‐integrating machine elements A Review on Sensor‐Integrating Machine Elements Applying a product modularization approach on the case of a battery pack Creation and analysis of additive-manufactured CT-equivalent phantom tissue surrogates Developing and testing of a 3D printed middle meningeal artery model for training in interventional neuroradiology Development and Evaluation of a 3D Printed Modular Phantom of the Lower Extremities for Optimization and Evaluation of TBI Technique Development of a 3D printed paranasal sinus system prototype for endoscopic surgery training Development of a model-based modular building kit for sensor-integrating machine elements—Theory and application Development of an Additive Manufactured Anthropomorphic CBCT Imaging Head Phantom Digitalisation and Sustainability in Cabin Design : Synergies and Dependencies Enhancing design representations of information and knowledge of complex and long-living assets by applying system modelling techniques Experimental investigation and probabilistic analysis of the buckling load of isotropic cylinders under multiaxial loading Graph-based information management for retrofitting long-living assets Integrating variety, assembly, and lightweight design in product architecture of cabin monument Methodical Development of Modular Product Families : Developing High Product Diversity in a Manageable Way Optimization of the potting design using an approach for load path optimized designs of sandwich structures Potenziale zur Steigerung der Nachhaltigkeit in der Flugzeugkabine Printing study and design guideline for small hollow structures in medical technology Product and production design - rethinking views on flexibility Product changes from various viewpoints along the product lifecycle – an empirical study Requirement analysis in medical phantom development : a survey tool approach with an illustrative example of a multimodal deformable pelvic phantom Simulation Of A Clinical Cbct Imaging System With The Monte Carlo Method Streuung der Traglast von Kreiszylinderschalen unter kombinierter Belastung Supporting modular product family representations by methodically utilising meta-models The influence of R/t-ratio on the imperfection sensitivity of the buckling load of thin-walled CFRP cylindrical shells Three-Dimensional-Bioprinted Non-Small Cell Lung Cancer Models in a Mouse Phantom for Radiotherapy Research Three-Dimensional-Bioprinted Non-Small Cell Lung Cancer Models in a Mouse Phantom for Radiotherapy Research Towards a holistic approach to increase sustainability in aircraft cabin design

Please note

The beta version does not yet contain all functions and information of the DNB portal catalogue. If you are missing information or want to order a medium, please visit the page in the DNB portal catalogue via the following link:

Katalog der Deutschen Nationalbibliothek

Dieter Krause (1962-)

Microelectronic modular system for sensor-integrating machine elements—model-based configuration and prototypical implementation of sensor-integrating bolts

A new design method to account for interlaminar stresses in laminated composites using machine learning

Ansatz zur Berücksichtigung von Obsoleszenz im Rahmen der Entwicklung modularer Produktfamilien

Approach for investigation of CFRP tribological stressed interfaces through levels of abstraction

Appropriate consideration of interfaces in product development

Buckling tests of cylindrical composite shells in multiaxial loading

Challenges in addressing sustainability within product development

Determination of the right level of detail: A methodical approach for life cycle costing integration in product development

Development and validation of a novel stenosis model for percutaneous transluminal angioplasty training of the internal carotid artery

Development of an anthropomorphic phantom of the lower extremities for feasibility studies and verification of total-body irradiation

Enhancing end-of-life sustainability through modularity and interface design in product development

Experimental Investigation of the Vibration Behaviour of Variant GFRP Sandwich Panels in Thermal Environment

Flexibility evaluation of modules with a focus on interfaces

Ganzheitliche Nachhaltigkeitsbewertung und -optimierung unter Nutzung kartografischer Generalisierung

Leveraging generative AI tools for design method support: insights, challenges, and best practices

Lifecycle-oriented interface standardization in modular product families: drivers and trade-offs across phases

MBfX: proposing semantics for systematically applying system modelling techniques across different applications and domains

Microelectronic modular system for sensor-integrating machine elements—model-based configuration and prototypical implementation of sensor-integrating bolts

Middle meningeal artery model for training endovascular treatment of chronic subdural hematomas in interventional neuroradiology

Model of the Venous System for Training Endovascular Treatment in Interventional Neuroradiology

Procedure for the multi-objective design and sustainability optimization of composite sandwich structures in aircraft cabin applications

Produktentwicklung und Konstruktionstechnik : Forschungserkenntnisse und -projekte der Jahre 2021 bis 2025

Scenario-based planning of design method validation studies and the associated effort

Supporting medical phantom design through a comprehensive design catalogue for phantom materials

Towards an indicator for assessing the potential for geometric standardization in the development of variant lightweight products

Towards improving the information management of aircraft cabin retrofits by processing quantity-on-hand documents

Towards mechanical vibration control by dynamically adaptive impedance elements in vibration testing : Ansatz zur mechanischen Schwingungsbeeinflussung mittels Dynamisch Adaptiver Impedanzelemente in der Versuchstechnik

Vibration reduction of lightweight structures through adjustable damping and stiffness properties at their interfaces

3D printed phantoms for medical imaging: recent developments and challenges

Hochpräzise Funktionsflächen an CFK-Bauteilen : Untersuchung der Schleifverfahren, des tribologischen Verhaltens und der Nutzungsphase am Beispiel von Motorspindelkomponenten aus Kohlenstofffaser-Kunststoff-Verbunden (CFK)

Developing and Testing of a 3D Printed Middle Meningeal Artery Model for Training in Interventional Neuroradiology

3D printed phantoms for medical imaging : recent developments and challenges

A review on sensor‐integrating machine elements

A Review on Sensor‐Integrating Machine Elements

Applying a product modularization approach on the case of a battery pack

Creation and analysis of additive-manufactured CT-equivalent phantom tissue surrogates

Developing and testing of a 3D printed middle meningeal artery model for training in interventional neuroradiology

Development and Evaluation of a 3D Printed Modular Phantom of the Lower Extremities for Optimization and Evaluation of TBI Technique

Development of a 3D printed paranasal sinus system prototype for endoscopic surgery training

Development of a model-based modular building kit for sensor-integrating machine elements—Theory and application

Development of an Additive Manufactured Anthropomorphic CBCT Imaging Head Phantom

Digitalisation and Sustainability in Cabin Design : Synergies and Dependencies

Enhancing design representations of information and knowledge of complex and long-living assets by applying system modelling techniques

Experimental investigation and probabilistic analysis of the buckling load of isotropic cylinders under multiaxial loading

Graph-based information management for retrofitting long-living assets

Integrating variety, assembly, and lightweight design in product architecture of cabin monument

Methodical Development of Modular Product Families : Developing High Product Diversity in a Manageable Way

Optimization of the potting design using an approach for load path optimized designs of sandwich structures

Potenziale zur Steigerung der Nachhaltigkeit in der Flugzeugkabine

Printing study and design guideline for small hollow structures in medical technology

Product and production design - rethinking views on flexibility

Product changes from various viewpoints along the product lifecycle – an empirical study

Requirement analysis in medical phantom development : a survey tool approach with an illustrative example of a multimodal deformable pelvic phantom

Simulation Of A Clinical Cbct Imaging System With The Monte Carlo Method

Streuung der Traglast von Kreiszylinderschalen unter kombinierter Belastung

Supporting modular product family representations by methodically utilising meta-models

The influence of R/t-ratio on the imperfection sensitivity of the buckling load of thin-walled CFRP cylindrical shells

Three-Dimensional-Bioprinted Non-Small Cell Lung Cancer Models in a Mouse Phantom for Radiotherapy Research

Three-Dimensional-Bioprinted Non-Small Cell Lung Cancer Models in a Mouse Phantom for Radiotherapy Research

Towards a holistic approach to increase sustainability in aircraft cabin design